今注文なさるとおよそ Thursday, 11 Apr日に品物が到着する予定です。
アメリカ、ドイツセンターから出庫される物品は貨物飛行機を通じてアジアセンターに運ばれた後日本税関を通過した後日本郵便局を通じて配送されます。
日本の輸入税金をすべて含む価格です。
輸入税金を担当して処理する運送会社を通じて配送されるため、お客様はまったく心配する必要がありません。
すべての製品はブランド正品のみ販売します。
アメリカ、ドイツ、韓国のセンターから正品の供給を受け、日本に配送しております。
日本に返品できるセンターがあります。
品物が満足でない場合日本センターへ返品可能です。
この製品を何日間遅く送ってもよろしければ安くて安全に配送いたします.
Advanced ideas require precise execution. XX™ demands precise frame fit specifications that are unique to XX. These specifications are the result of the innovative and revolutionary technology that makes XX shifting the lightest, fastest, and most precise in the mountain bike market today. Please take the time to carefully review the frame fit specifications to ensure you have the information you need to build the perfect XX equipped mountain bike. We didn't compromisewhen developing the XX group; we know you won't either.
The low-profile XX Front Derailleur was designed from scratch specifically for 2x10. It’s a critical part of the XX shifting experience: the fastest front shift ever. Offered in a wide variety of clamp-mount and direct-mount options.
Direct Mounts Defined.
Direct Mount FD’s give frame designers freedom and flexibility. Based on specific manufacturer’s frame designs, we are offering multiple XX Direct Mount types: S1, S2 and S3.
Since Direct Mount FD’s are chainring specific, each type is available in the following options: 26-39, 28-42, (For example, 28-42 rings require a 28-42 Direct Mount FD.)
There are a number of manufacturers now using the Direct Mount system for their front mechs that screw directly onto specific mounts on the frame as opposed to regular band-on mechs, but there are a number of different standards for the mounts being used, hence why SRAM make S1, S2 and S3 options. Direct Mount is not a SRAM specific standard, but they are now making front mechs to accommodate these new standards.
S1 – Easy to recognise, as it is the only one with a 42.7mm gap between the centres of the 2x mounting holes!
S2 – Has a smaller 22.1mm gap between the centres of the 2x mounting holes. These 2x holes are also offset by aprox 5mm, with the front one being set further out (i.e. closer to the derailleur cage). The front mounting hole is almost flush with the inner cage of the derailleur when fully retracted (i.e. as it comes out of the box)
S3 – Also has 22.1mm gap between the centres of the 2x mounting holes. However, these 2x holes are flat, not offset. The inner cage of the derailleur sits a fair way out from the mounting bracket (aprox 16.75mm measured from the inside of the mount bracket to the outside of the INNER cage) when fully retracted (i.e. as it comes out of the box)
Direct Mount front derailleurs are also chainring specific, as there is no provision to raise or lower them for different sized chainrings, hence why there are separate XX mechs for 39t and 42t chainring set-ups.
TP – Top Pull
BP - Bottom Pull
Final Note: Your frame must be designed for a Direct Mount FD in order to use one.
For more information please refer to the PDF below
http://www.sram.com/_media/techdocs/XX_Frame_Fit_Specifications.pdf
Features:
• Cage Material: Steel
• Clamp Material: Forged AL-6061-T6
• Hardware: TORX® T25 bolts
• Shifting Positions: 2
• Cable Routing: Top or bottom pull
• Direct Mount
• Types: S1, S2, S3
• Options per type: 26-39, 28-42
• 116 grams